Toilet Installation Service in Rochester, NY

Wondering if it’s finally time to ditch that old, troublesome toilet? Here are some telltale signs you need to heed the call of the new throne:

Constant Repairs

If you’re having to call us out every few months for the same lingering toilet issues – running refills, clogs, leaks, you name it – it’s probably more cost-effective at this point to just bite the bullet on a new installation. Throwing good money after bad is never fun.

Cracks or Damage

Toilets can start developing all kinds of cracks, chips, and structural damage as they age, especially if you’ve had a few too many close encounters with a toilet brush or plunger. Once that porcelain tank or bowl gets compromised, it’s basically a ticking time bomb waiting to burst open.

Rocking and Wobbling

If your toilet feels a bit unstable or wobbly when you go to make a landing, chances are the floor bolts and seal have deteriorated over time. That unsteady base is just asking for a messy blowout incident down the road.

Constant Clogs

Having to break out the plunger or snake seemingly every other day is a clear sign that toilet’s drain just isn’t cutting it anymore. Could be due to aging pipes, low flushing power, or just poor design in general.

Excessive Water Usage

Older toilets from way back in the day can be extremely inefficient when it comes to water usage per flush. If your utility bills are through the roof, a new low-flow or dual-flush model can seriously reduce that water waste.

Aesthetic Woes

Let’s face it – sometimes that avocado green or potpourri pink toilet color scheme from the 70s has just gotta go. If your cracked, stained toilet is an eyesore making you dread bathroom time, a fresh replacement can revitalize the whole space.

While it’s possible to install a toilet yourself, it’s easy to run into issues like leaks or flooding. Instead, you can just call the pros at Reimer and get it done right the first time! Here’s why professional toilet installation is always the move:

Proper Fitting and Alignment

Having a toilet improperly fitted or misaligned on the drain pipe is just asking for a world of leaks, clogs, and other nasty issues down the road. Our certified plumbers have the know-how to ensure a perfect fit following all local codes and best practices.

Leak Prevention

One tiny mistake in the wax ring seal or flange connections is all it takes for water to start slowly leaking and causing all kinds of hidden, expensive damage over time. We’ll make sure those leak points are locked down tight.

Vent and Drain Connections

Toilets need to tie into your home’s drain and vent pipes properly for smooth waste removal and prevention of hazardous sewer gas buildup. Don’t just wing those critical connections!

Sturdy, Secure Mounting

You don’t want your toilet shifting, rocking or moving at all once it’s installed. Our plumbers will ensure it’s securely mounted to the floor and braced to handle years of use.

Code Compliance

There are all sorts of local codes and regulations around toilet installations that vary by area. Hire a certified pro to ensure your new throne is 100% legit.

Future-Proofing

From offset drain pipes to adding cleanouts, we’ll take the small extra steps during installation to allow for easier maintenance and replacements down the road.

Why risk an expensive, messy headache just to try saving a few bucks? With Reimer’s professional toilet installers on the job, you can be confident it’ll be a straightforward, worry-free process.

Even a simple toilet installation can turn into a serious headache if you’re not a trained pro. Here are some of the common difficulties that can throw a wrench into the works:

Leveling That Base

Getting that toilet flange and bowl perfectly level is crucial for proper drainage and stable mounting. But between sloping floors or off-kilter rough-in pipes, it’s often easier said than done. Experienced plumbers have the tricks to ensure a solid, level base.

Wax Ring Woes

Creating a watertight seal with that wax ring seems straightforward, but there’s an art to getting it compressed just right. Too much squeeze and it can extrude out and clog the drain inlet. Too little and you’re risking slow leaks over time.

Drain Misalignments

If that toilet drain opening isn’t bang-on aligned with the existing pipe, you’re looking at potential leaks, clogs, and maybe even having to adjust things. Plumbers have the right offset adapters and know-how to finesse those connections properly.

Venting Issues

Toilets need to tie into your home’s main plumbing vents to allow air flow and prevent clogs or hazardous sewer gas buildup. Having those vents blocked, damaged, or just too far away can seriously complicate an installation.

Outdated Plumbing

Older homes with ancient cast iron, galvanized or even strange proprietary piping setups from decades past can make new toilet installs a nightmare. Plumbers are trained to navigate and adapt to those outdated systems.

Tight Spaces

Trying to wrestle a new toilet into a cramped powder room or basement bathroom is like a game of plumbing Twister. Experienced pros know the techniques to squeeze new fixtures into even the tightest confines.

Calling in the experts at Reimer ensures we’ll have the skills and tools to overcome any toilet installation hurdles that pop up.

So how long are you gonna have to hold it while we get that new toilet installed? The good news is, toilet swaps are usually a pretty quick job for our experienced plumbing crews. Most basic installations can be wrapped up in 1-2 hours from the time we arrive.

Now, there are certainly some factors that could extend that timeline a bit:

Old Toilet Removal

If we’re dealing with an ancient, rusted toilet that’s been caulked and cemented into place for decades, getting that bad boy disconnected and hauled out can add some extra time and effort.

Plumbing Modifications

While we always aim for a clean swap using existing drain and supply connections, sometimes we discover the need to modify or move plumbing lines to accommodate the new toilet’s specs. That’ll require some additional labor.

Tight Spaces

Maneuvering a bulky new toilet into a tiny powder room or basement bathroom can slow things down considerably. We may need to get creative with taking it apart to squeeze everything into place.

Inspection/Repairs

If we discover any hidden issues like rotted flooring, leaky supply valves, or cracked drain pipes during the removal process, that’ll require time to properly inspect and repair before the new installation can proceed.

So while a straight toilet swap in an open area with modern plumbing is usually quick work, just know that any curveballs can impact the timeline. But hey, as long as you have access to another bathroom, an extra hour or two is a small price for a professional, no-hassle install!

Picking out a new toilet is about more than just plopping down on the showroom models until one feels right. You’ve gotta consider a bunch of factors to ensure that porcelain throne is a perfect fit for your bathroom and household’s needs. Here are some key things to mull over:

Bathroom Size

Obviously, you’ll need to measure that bathroom footprint and ensure the new toilet’s dimensions will fit like a glove. Pay close attention to rough-in dimensions from the wall as well as allowing enough clearance space around the toilet.

Household Needs

If you’ve got a busy household with heavy use, you’ll probably want a toilet with more flushing power rather than skimping on a low-flow model. But empty nesters might prioritize water efficiency over flush capability.

Water Usage

Speaking of efficiency, checking that toilet’s gallons-per-flush rating is key if you want to keep utility costs down. WaterSense certified high-efficiency models can be a great eco-friendly choice.

Style Preferences

While functionality should be the priority, toilet style and colors can really tie together the look and feel of your bathroom design. From traditional to modern, we have all the shape and finish options.

Accessibility Needs

For households with accessibility requirements, making sure that toilet meets ADA height guidelines and has enough clearance space for walkers or wheelchairs is crucial.

Special Features

Integrated bidets, self-cleaning modes, built-in night lights – there are all kinds of fancy add-ons and features available on modern smart toilets if you’re looking to splurge.

The good news is, the Reimer team has tons of experience guiding customers through all these considerations. We’ll take the time to understand your specific needs and budget, then recommend the perfect toilet to handle your household’s requirements.

Getting ready for your new toilet installation? A little prep work goes a long way towards making sure our plumbers can work their magic smoothly. Here are some tips to get that bathroom prepped and primed:

Clear the Work Area

First things first – take some time to clear out any floor mats, trash cans, shelving units or other obstructions around the existing toilet. Our crews will need a wide open area to maneuver that new toilet bowl into place without damaging anything.

Remove Toilet Tank Lid

If you’re able, go ahead and remove the tank lid from your old toilet before we arrive. This gives our plumbers easy access to disconnect the water supply line right from the start.

Check Plumbing Access

Make sure the shut-off valves for the toilet’s water supply line are easily accessible and in working condition. We may need to turn that water supply off and on a few times during the installation process.

Confirm Drain Alignment

Do a quick visual check to ensure the existing drain pipe looks to be properly aligned and centered with where the new toilet will be installed. Any obvious misalignments could require some extra work.

Clear a Pathway

Toilets are deceptively heavy and bulky. Take a look at the pathway our crew will need to haul the old toilet out and new one in, clearing any tight hallways or obstructions.

Secure Pets

Toilet installations create a bit of controlled chaos. Make sure any household pets are safely secured away from the work area so they don’t get underfoot or accidentally escape through a propped-open door.

A few simple prep steps show you care about making our plumbers’ lives easier! With the work area ready to go, they can focus on ensuring your new toilet installation is a smooth, no-hassle process.

So you’ve got a shiny new porcelain throne ready for installation – but what about that old, decrepit toilet you’re replacing? You can’t just toss that bulky beast into the regular trash. Here are some tips on properly disposing of your old commode:

Let Reimer Handle It

The easiest option by far is just to have our professional plumbing crew take care of it for you. For a small additional fee, we’ll disconnect, remove and responsibly haul off that old toilet so you don’t have to lift a finger (or strain your back).

Contact Local Waste Hauler

If you’re a DIY kind of person, check with your regular municipal waste removal company to see if they offer any special toilet disposal pickups or drop-off locations. Some areas have specific requirements around prepping toilets for the dump.

Look Into Recycling

Believe it or not, many communities actually have toilet recycling programs these days where they’ll take your old porcelain fixture and repurpose the materials. This option is better for the environment than just landfilling it.

Donate for Reuse

For toilets that are still in decent working condition, you may be able to donate them to local reuse stores or habitat organizations that will refurbish and resell or gift them to a family in need.

Proper Disposal Techniques

If you absolutely must dispose of an old toilet yourself, make sure to remove all plastic and metal components first. The remaining porcelain should be broken up into pieces that can fit into heavy duty contractor bags before putting out for bulk pickup.

Our two cents? Save yourself the hassle and just let the Reimer crew responsibly take that old throne off your hands when we install your new one. One less thing to worry about as you renovate your bathroom!

Tired of watching your hard-earned cash swirl down the toilet with every single flush? Cutting back on that excessive water usage is a lot easier than you think with the right high-efficiency toilet features. Here are some things to look for:

Dual-Flush Technology

Toilets with dual-flush valves give you two flush options – a low 0.8-1.1 gallon setting for liquid waste, and a higher 1.6 gallon setting when you really need the extra power. This allows you to be more mindful about water usage.

Low Gallon-Per-Flush Ratings

Even standard single-flush toilets these days come rated at a much lower 1.28 gallons-per-flush or less compared to older 3-5 gallon models. Upgrading to a modern low-flow toilet can provide huge water savings.

WaterSense Certification

Look for the EPA’s WaterSense label, which certifies that toilet meets strict efficiency and performance standards. WaterSense high-efficiency toilets use at least 20% less water than standard 1.6 gallon models.

Pressure-Assisted Flushing

Some toilet models utilize pressurized air or water tanks to really boost flush power while still using less water overall. Don’t sacrifice cleaning performance for efficiency!

Dual-Flush Conversion Kits

Already have a basic toilet you like but want to cut down on water usage? You can actually purchase easy-to-install dual-flush conversion kits to add that water-saving functionality.

The good news is, today’s high-efficiency toilets can slash your household’s water consumption significantly while still providing solid flushing capability. Every little bit of conservation helps!

Unless you’re looking to turn your bathroom into a squatty-potty torture chamber, toilet height is an important consideration. After all, you’re gonna be spending a decent chunk of time getting intimately acquainted with that porcelain throne. Here’s a quick rundown on finding the perfect height:

Standard Height

For decades, the standard toilet height in the US was around 15 inches from floor to bowl rim. This lower stature works okay for smaller folks, but it can be pretty backbreaking for taller individuals.

Comfort Height

Also known as right height or ADA-compliant models, these toilets stand taller at around 17-19 inches. The extra couple inches make sitting down and standing back up much easier on the knees and back.

Compact Options

If you’re dealing with a really tight bathroom space, there are compact elongated or round bowl options that shave an inch or two off the standard height while still providing a bit more elevation than true standard models.

Raised Seats

Can’t afford to do a full toilet swap? You can actually purchase raised toilet seats that add 3-4 inches of height to your existing toilet. These are great affordable options for those with mobility limitations.

Kid/Short Stature

On the flip side, some toilet models are designed specifically for shorter individuals like kids or those under 5 feet tall. With seats around 12 inches high, they prevent that dangling legs scenario.

The right height makes a huge difference in comfort and accessibility. So take some measurements, factor in your specific height needs, and make sure that new toilet will have you feeling like royalty.

You’re probably not installing a new throne just for the resale value. But make no mistake – upgrading to a sleek, high-efficiency toilet can definitely provide a nice little boost to your home’s overall value and buyer appeal. Here’s why:

Aesthetic Appeal

Let’s face it, that cracked, stained toilet from the 70s is doing your bathroom no favors in the looks department. Replacing it with a clean, modern fixture with all the fancy flush options instantly revitalizes and modernizes the space.

Water Efficiency

Those old water-guzzling toilets are a major turn-off for eco-conscious buyers these days. Highlighting new low-flow or dual-flush models shows you’ve invested in more efficient home utilities that’ll save them money long-term.

Low Maintenance

Nobody wants to inherit a toilet on its last legs that’s going to keep springing leaks and clogs. A new toilet represents a durable, low-maintenance fixture buyers won’t have to fuss with anytime soon.

Bathroom Remodels Pay Off

Even something as seemingly minor as a toilet replacement signals to buyers that you’ve put work into renovating and caring for the home. Well-maintained, updated bathrooms are a huge selling point.

Luxury Features

If you really want to impress, splurging on a decked-out comfort height toilet with all the integrated bidet and self-cleaning bells and whistles can make your bathroom feel like a luxury hotel’s.

At the end of the day, that old, inefficient toilet is like a rotten tooth in an otherwise stunning smile. Investing in a new modern fixture pulls it all together and makes your bathroom feel fresh and appealing to prospective buyers. It’s a small price to pay for a solid return!